Novak's Ballistic Epoxy Dipped Hand Wound Stators – 6.5T - 21.5T feature the added benefits of epoxy. Each stator offers strengthened reliability and higher power operation performance of the motor— ideal for extreme racing conditions.


The Ballistic Hand Wound Stator is dipped in a special motor winding epoxy and then oven-cured for several hours. Once the epoxy is cured, it prevents the wires in the stator from moving or rubbing against the laminations and other wires in extreme conditions. Preventing this unwanted contact avoids shorts in the motor coils which can lead to premature failure. The epoxy also helps transfer heat from the wires to the lamination, helping motor operation at higher power levels. 


To read more about the benefits of epoxy, click on Novak’s technical article: Benefits of an Epoxy-Dipped Stator.
The following epoxy dipped stators are available: 

    

  • 6.5T / 6400Kv (#S6606E) 

  • 7.5T / 5800Kv (#S6607E) 

  • 8.5T / 5000Kv (#S6608E) 

  • 10.5T / 4200Kv (#S6610E) 

  • 13.5T / 3300Kv (#S6613E) 

  • 17.5T / 2200Kv (#S6617E) 

  • 21.5T / 1800Kv (#S6621E)





To find out more about Novak’s Ballistic Hand Wound Stators, click below on More Details. Note: Wire color shown may differ. 



The Ballistic motor’s innovative design defines versatility by featuring interchangeable wound stator construction. By unscrewing the main screws, the motor’s end bells and sensor assemblies can be easily removed to leave only the stator, which can be replaced with a different wound stator. The ease of installation and numerous motor-wind options provides drivers with a cost effective way to race many different classes without purchasing a large number of motors. In addition, the stators can be easily replaced if damaged.


Like all Novak brushless motors, the Ballistic Epoxy Dipped Hand Wound Stators are designed and tested at the Novak facility in Irvine, Calif. Each stator is hand-wound for maximum copper fill and individually tested for consistency. The stators are also inspected, packaged and weighed to ensure the best product is sent to customers.