The Novak 1S LiPo Booster Module (#5477) is for single-cell racing; it replaces the receiver battery pack and will provide a constant 6 volts and 3 amps of power to the receiver and servo in your race set-up. This module connects to your main battery pack and will actually ¡°boost¡± the battery pack¡¯s 3-4 volts to a standard 6 volts for the duration of the run-- which allows the receiver and servo to operate as they are intended to. There is no need for special wiring or recharging of a receiver battery pack. Simply connect the module¡¯s power wires to the main battery pack or the ESC¡¯s battery terminals, and plug the harness into your receiver¡¯s battery slot.
The Novak 1S Booster Module easy to connect, extremely small and lightweight. It is compatible with brushless or brush speed controls that would normally operate with a 2-3S LiPo pack. By increasing the battery pack voltage to the receiver and servo, the module allows you to use any radio receiver in single-cell applications, including spread spectrum radios. The usual voltage fluctuations that cause reception issues with your radio using 1S LiPo packs are no longer a concern. It is recommended to use the Novak Glitch Buster Capacitor (#5626) with 2.4GHz radio systems to ensure trouble-free operation.
Note: This unit replaces the Smart Boost 1-Cell Step-Up Module (#5474), and does not include LiPo cutoff circuitry.
FEATURES
Increases a 1-cell Li-Po battery pack's voltage from 3.3V - 4.2V to 6V, which provides enough power to run almost any servo or receiver
Provides consistent power to vehicle¡¯s electronics during the entire charge
On/Off Switch for clean installation and easy operation
Universal JST Plug that fits all popular brand receivers
Compatible with brushless and brush speed controls
SPECIFICATIONS
Module Size: 0.39¡± x 1.18¡± (10 x 30 mm)
Weight: 0.43 oz (12.2 g)
Input Cells: 1S LiPo
Output Voltage: 6 Volts
Output Current: 3 Amps
Wire Size: 20 GA silicone battery power wire (red/black)
LED: Blue (on-board) |