Ballistic Spec High-RPM Brushless Motors- 10.5T, 13.5T, 17.5T

(#3620, #3623, #3627)

Product Description:




A Higher-RPM Ballistic Spec






Competition racing products are nothing new to the RC world, but for the first time, application-specific spec class racing products are starting to make their way to the tracks. Novak is pleased to bring spec racers a new weapon for the racing battlefield - the Ballistic Spec High-RPM Brushless Motor, which is available in three motor winds: 10.5T (#3620), 13.5T (#3623) and 17.5T (#3627). 
The Ballistic Spec High-RPM motor features a higher Kv stator wound with Novak’s low resistance red wire for faster speeds, and vented end bells for cooler operation. In addition to the complete motor, the Ballistic High-RPM Red Wire Stator are also available so racers can convert any Ballistic 540 motor into a spec-racing bullet!

COMPLETELY REBUILDABLE DESIGN
The new Novak Ballistic High-RPM 17.5T motor has the same ingenious Ballistic brushless motor design and is completely rebuildable. At the track, service and repairs are a snap, allowing you to get back to turning laps right away. Replaceable sensor harness, replaceable rotor, replaceable sensor board, replaceable stator, replaceable end bells and bearings- you name it. If the motor has it, you can pick up the spare part and be back in action in no time!

Compatibility:

SPEED CONTROL COMPATIBILITY
The following ESCs are recommended for use with the Ballistic Spec High-RPM Brushless Motor: 

Pulse Racing (#1755)

Impact Racing (#1730) 
Havoc Pro SC w/X-Drive (#1745) 
GTB 2 w/X-Drive (#1748/#1749) 
EDGE 2S (#1850/#1851) 
Club ESC (#1852)

RECOMMENDED APPLICATIONS
The Ballistic Spec High-RPM motor is recommended for the following applications;


2WD Buggy 
2WD Truck 
2WD Short Course Truck 
4WD Buggy 
12th Scale Pan Car 
Formula 1 
Dirt Oval 
Road Oval 
Spec Racing 
Touring Car 
Drift Car 
Rock Crawling (ESC will operate in non-crawling mode)


Features:





Pro spec racing motor featuring a higher Kv stator hand wound with Novak's low-resistance red wire for higher RPM and faster track speeds

Vented end bells for cooler operating motor temperatures resulting in faster speeds and longer run-times

Engineered by Novak to meet ROAR specifications 

Sensor-based system for excellent torque and low-speed driveability 

Rebuildable design with replaceable sensor harness, rotor, sensor board, hand-wound stator, sleeve, both end bells, ball bearings, and hardware

Adjustable motor timing to allow fine tuning of motor feel and power band

Removable shielded sensor harness plugs into a silicone-sealed gasket to keep dirt and debris from damaging the motor’s sensor plug, and keeps your sensor harness secure 

Oversized front bearing [1/2” x 3/16” (12.7 x 4.8mm)] for increased load handling and bearing life

Nickel-plated, sintered Neodymium rotor with a 0.125” pinion shaft that accepts all existing pinion gears

Carries Team Novak’s commitment to excellent quality, support and warranty (120 days)

Designed and manufactured by Team Novak in Irvine, California using the best components from around the globe. All brushless motors are 100% tested to ensure your product works right out of the box and on the track!



Specifications: 




Motor Turn
10.5T
13.5T
17.5T

Part Number
#3620
#3623
#3627

Motor Size (540)
2.07" x 1.41" 
(52.6 x 35.8mm)
2.07" x 1.41" 
(52.6 x 35.8mm) 
2.07" x 1.41" 
(52.6 x 35.8mm) 

Motor Weight
6.1 oz. (173g) 
6.1 oz. (173g) 
6.1 oz. (173g) 

Shaft Diameter (inches)
0.125"
0.125"
0.125 

Kv (Unloaded)
4,400 RPM/volt
3,475 RPM/volt
2,350 RPM/volt

Watts
235
195
130

Magnetic Material
High-Strength 
Sintered Neodymium
High-Strength 
Sintered Neodymium
High-Strength 
Sintered Neodymium 

Design
Sensored
Sensored
Sensored 

Stator Insert Color
Blue
Orange
Yellow


Parts:









Replacement / Optional Parts










#5351-#5353 Brushless Shielded Sensor Harnesses – 9", 6" & 4" (replacement/optional)


#5416-#5418 Brushless Motor Cooling Kit – Black (optional)


#5508 14GA Brushless Motor & Battery Wire Set – 10 pcs(replacement)


#5647/#5651 Cooling Fan 25x25x10mm (replacement)


#5731 3.5mm Low-Loss Power Connector – 5 pairs (optional)


#5940 Ballistic Front End Bell and Bearings – 1/8" (replacement)


#5941 Ballistic Sintered Rotor – 12.3mm (replacement)


#5954 Ballistic 540 SmCo Tuning Rotor


#S5420-#S5424 Brushless Motor Sleeves – Black (replacement/optional)


#S5932 Ballistic Motor Hardware Kit (replacement)


#S5942 Ballistic Timing/Sensor Assembly (replacement)


#S5943 Ballistic Back End Bell (replacement)


#S5944 Ballistic Bearing Cap with Rear Bearing (replacement)


#S5946 Ballistic Ceramic Ball Bearing & Bearing Cap (optional)


#S6603-#S6608 Ballistic Wound Stators -- 3.5T-8.5T (optional for ROAR Modified racing)


#S6610-#S6621 Ballistic Wound Stators -- 10.5T-21.5T (replacement/optional)

Media:


Photos