CRAWLER BRUSHED MOTOR FEATURES (#3545 & #3555) |
|
Specifically designed for R/C vehicles that require precise movement control |
|
High number of turns for excellent torque and long-run times |
|
Dual-ball bearing for smoothness and efficiency |
|
High-strength magnet for unmatched brush motor performance |
|
100 percent rebuildable with user-replaceable brushes and springs |
|
Easily accessible commutator for easy maintenance |
|
Direct-Solder Wiring Tabs for flexible soldering options |
|
Novak factory-installed motor capacitors to reduce glitching |
|
Made in Japan |
|
Tested by Novak in Irvine, Calif. |
|
CRAWLER BRUSHED MOTOR SPECS (#3545 & #3555) |
|
Number of Turns: 45 (#3545); 55 (#3555) |
|
Design: Stand-up Brushed |
|
Input Voltage: 2S Li-Po cells or 4-7 cells (1.2V/cell) |
|
Motor Size: 2.07" x 1.42" (52.7 x 36.1 mm) |
|
Shaft Diameter: 0.125" (3.2 mm) [accepts all existing pinion gears] |
|
Bearing: Novak #5937 Steel Ball Bearings ABEC-3 (1/8"I.D. x 3/8"O.D. x 5/32"W) |
|
Motor Weight: 5.97 oz., 169 grams (#3545); 6.03 oz., 171 grams (#3555) |
|
Magnet: High-Strengh Ferrite |
|
RPM: 8,000 @ 7V or Kv of 1140 RPM/Volt (#3555)
|
|
Power Output: 22 Watts @ 4,500 RPM (#3555) |
|
Efficiency Peak: 67% @ 6,300 RPM torque 588gm/cm (#3555) |
|
TERRA CLAW CRAWLER BRUSHED MOTOR FEATURES (#3556) |
|
Specifically designed for R/C vehicles that require precise movement control |
|
High number of turns for excellent torque and long-run times |
|
Direct-Solder Wiring Tabs for flexible soldering options |
|
Equipped with brass bushings |
|
Made in China |
|
Tested by Novak in Irvine, Calif. |
|
TERRA CLAW CRAWLER BRUSHED MOTOR SPECS (#3556) |
|
Number of Turns: 55 |
|
Design: Non Rebuildable |
|
Input Voltage: 2S Li-Po cells or 4-7 cells (1.2V/cell) |
|
Motor Size: 1.96" x 1.40" (49.8mm x 35.6mm) |
|
Shaft Diameter: 0.125" (3.2 mm) [accepts all existing pinion gears] |
|
Motor Weight: 5.80 oz., 164 grams |
|
RPM: 8,000 @ 7V or Kv of 1140 RPM/Volt
|
|
Power Output: 22 Watts @ 4,500 RPM |
|
Efficiency Peak: 67% @ 6,300 RPM torque 588gm/cm |
|
REPLACEMENT / OPTIONAL PARTS |
|
#5514 14G Silicone Power Wire Set: 3 feet Black, Red and Blue (optional) |
|
#5731 Low-Loss Power Connectors – 3.5mm (optional) |
|
#5832 Lead-Free Silver Solder - 15g (optional) |
|
#5935 Ceramic Ball Bearing ABEC-5 (1/8"I.D. x 3/8"O.D. x 5/32"W) (option for #3545 & #3555l) |
|
#5937 Steel Ball Bearings ABEC-3 (1/8"I.D. x 3/8"O.D. x 5/32"W) (replacement for #3545 & #3555) |