ESC Spec
#1835

Motor Type
Brush / Brushless

Fwd/Brk/Rev
Fwd/Brk/Rev: F/Drag Brakes/R (crawling modes); 
F/B (basher mode); F/R (servo mode)
F/B/R (brushless mode)


Input Cells (LiPo/Ni-MH)
Brushed: 2-3S LiPo or 4-9 NiMH 
Brushless: 2S LiPo

Size (in/mm)
1.15" x 0.95" x 0.79" (29.0 x 24.3 x 20 mm)

Weight (oz/g)
0.75 oz. (21.31 g)

On-Resistance (ohms)
0.0011 ohms

Motor Limit

2S Brushed:  540-size: 20T or higher; Any 380-size
3S Brushed: 540-size: 35T (Eiger); Any 380-size
2S Brushless*: 540-size: 10.5T or higher; Any 380-size (*2-pole, sensor-based, mechanically timed to 30 degrees)


BEC (volts / amps)
6.0 volts DC / 2.0 amps 

Wire Size (GA)
14G Super-Flex Copper-Strand Silicone Wire

Battery/Motor Plug
Eiger: Tamiya-style battery & gold-plated Bullet motor plugs factory installed

Status LEDs
4 (multi-colored)







Motor Spec
35T
55T (discontinued)


System Part Number
#3230
#3231

Motor Size (540)
1.96" x 1.40" (40.8 x 35.6mm) 
1.96" x 1.40" (40.8 x 35.6mm)

Motor Weight
5.80 oz. (164.0 g) 
5.97 oz. (169.0 g) 

Shaft Diameter (inches)
0.125 
0.125 

Design
Non-Rebuildable
Non-Rebuildable

Bearing
Standard 3/8" x 1/8"
Standard 3/8" x 1/8"

Magnet
High-strength Ferrite
High-strength Ferrite

Input Voltage
2S-3S Li-Po cells or 
4-7 cells (1.2V/cell)
2S-3S Li-Po cells or 
4-7 cells (1.2V/cell)