Champions by design. 1:10 scale 2WD off road has been Team Associated's signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 12 of the 17 I.F.M.A.R. World Championships contested since the racing class began. In fact, Team Associated has won more 2WD I.F.M.A.R World Championships than all other manufacturers combined!

The engineering continues. Team Associated's RC10B6.1 has been met with wild success by racers across the globe. As good as that may be, the engineers of Team Associated's Area 51 became aware of the advantages that could be gained in certain track conditions by racing a lighter-weight B6.1.

Enter the RC10B6.1 Factory Lite. Shedding over 45 grams of weight from the original B6.1D, the Factory Lite was designed to excel in classes requiring Spec motors, allowing the racer to take full advantage of the performance offered by the reduced weight. The Factory Lite sheds 30 of the 45 grams in rotational mass alone.

Parts used to achieve the weight savings include the MIP Pucks(TM) system, MIP Pucks(TM) 7075-T6 aluminum outdrives, MIP Pucks(TM) Bi-Metal(TM) lightweight R-CVD bones (67mm), Factory Team direct drive system, and a lightweight body.

These were the Reedy Power items used in the Factory Lite to WIN the recent 17.5 2WD Buggy National Title!

#27402 Reedy S-Plus 17.5T Comp Spec
#27004 Reedy Blackbox 510R Comp ESC
#27324 Reedy Zapper SG 3600 110c LiPo
#27101 Reedy HV Hi-Torque Digital Servo
#27200 Reedy 1216-C2 Dual AC/DC Battery Charger
#9690 Front 1:10 scale buggy wheels
#9695 Rear 1:10 scale buggy wheels

MIP Pucks Bi-Metal is a trademark of Moore's Ideal Products LLC

Required to Complete

  • 1:10 scale 540-size electric motor
  • 1:10 scale electronic speed control
  • 7.4V LiPo or 6.6V LiFe battery (shorty pack, saddle pack, or square pack) Saddle Pack and Square can be used, but you must remove the battery strap #91731 -- the battery must be held in with 2 sided tape.
  • Battery charger (able to charge one of the batteries mentioned above)
  • 2-channel surface transmitter, and its batteries
  • 2-channel receiver
  • Steering servo
  • Pinion gear (48 pitch)
  • Spray paint for polycarbonate body and wing
  • 1:10 scale buggy wheels
  • 1:10 scale buggy tires
  • Glue for tires and wheels