NOVAK'S BRUSHED MOTORS

As the crawling segment continues to grow, Novak has continually expanded its line of crawling brushed motors.
FIFTY-FIVE AND FORTY-FIVE CRAWLER BRUSHED MOTORS
Novak's Fifty-Five Crawler Brushed Motor - 55T and Forty-Five Crawler Brushed Motor - 45T, which is slightly faster than Novak's original 55-turn brushed motor, provide precise movement control, and exceptional torque and long-run times due to the motors' high-turn counts. Both motors are completely rebuildable, each with an easily accessible commutator and replaceable brushes and springs. The brushed motors are also outfitted with dual-ball bearings for a smooth and efficient ride, and high strength magnets for unmatched brush-motor performance. On top of that, Novak pre-installed three motor capacitors to simplify the installation process, so users can be crawling in no time.
Additionally, the Fifty-Five (#3555) and Forty-Five (#3545) Brushed Motors are available individually and as a combo set with Novak's popular brushed ESC: the Rooster Crawler Edition (#1841). The two brushed motors are also compatible with Novak's M2 Dig Dual Brush ESC (#1846).
TERRA CLAW CRAWLER BRUSHED MOTOR -- 55T
Novak’s affordable Terra Claw Crawling Brushed Motor (#3556), which is also available individually, provides precise movement control, and exceptional torque and long-run times due to the motor’s high-turn count. Additionally, the Terra Claw is extremely durable, ensuring many smooth and maintenance-free crawling seasons. 
The Terra Claw is also compatible with Novak's M2 Dig 3S Dual Brush ESC (#1846) and Rooster Crawler Edition Brushed ESC (#1841). Two Terra Claw motors and the M2 Dig 3S ESC are available in Novak's M2 Dig 3S ESC/Dual Terra Claw Brush Motor Combo (#1845).




CRAWLER BRUSHED MOTOR FEATURES (#3545 & #3555)


Specifically designed for R/C vehicles that require precise movement control


High number of turns for excellent torque and long-run times


Dual-ball bearing for smoothness and efficiency


High-strength magnet for unmatched brush motor performance


100 percent rebuildable with user-replaceable brushes and springs


Easily accessible commutator for easy maintenance


Direct-Solder Wiring Tabs for flexible soldering options


Novak factory-installed motor capacitors to reduce glitching


Made in Japan


Tested by Novak in Irvine, Calif. 

 

CRAWLER BRUSHED MOTOR SPECS (#3545 & #3555)


Number of Turns: 45 (#3545); 55 (#3555)


Design: Stand-up Brushed


Input Voltage: 2S Li-Po cells or 4-7 cells (1.2V/cell)


Motor Size: 2.07" x 1.42" (52.7 x 36.1 mm)


Shaft Diameter: 0.125" (3.2 mm) [accepts all existing pinion gears]


Bearing: Novak #5937 Steel Ball Bearings ABEC-3 (1/8"I.D. x 3/8"O.D. x 5/32"W)


Motor Weight: 5.97 oz., 169 grams (#3545); 6.03 oz., 171 grams (#3555)


Magnet: High-Strengh Ferrite



RPM: 8,000 @ 7V or Kv of 1140 RPM/Volt (#3555)



Power Output: 22 Watts @ 4,500 RPM (#3555)


Efficiency Peak: 67% @ 6,300 RPM torque 588gm/cm (#3555)

 

TERRA CLAW CRAWLER BRUSHED MOTOR FEATURES (#3556)


Specifically designed for R/C vehicles that require precise movement control


High number of turns for excellent torque and long-run times


Direct-Solder Wiring Tabs for flexible soldering options


Equipped with brass bushings


Made in China


Tested by Novak in Irvine, Calif. 

 

TERRA CLAW CRAWLER BRUSHED MOTOR SPECS (#3556)


Number of Turns: 55


Design: Non Rebuildable


Input Voltage: 2S Li-Po cells or 4-7 cells (1.2V/cell)


Motor Size: 1.96" x 1.40" (49.8mm x 35.6mm)


Shaft Diameter: 0.125" (3.2 mm) [accepts all existing pinion gears]


Motor Weight: 5.80 oz., 164 grams



RPM: 8,000 @ 7V or Kv of 1140 RPM/Volt



Power Output: 22 Watts @ 4,500 RPM


Efficiency Peak: 67% @ 6,300 RPM torque 588gm/cm

 

REPLACEMENT / OPTIONAL PARTS


#5514 14G Silicone Power Wire Set: 3 feet Black, Red and Blue (optional)


#5731 Low-Loss Power Connectors – 3.5mm (optional) 


#5832 Lead-Free Silver Solder - 15g (optional) 


#5935 Ceramic Ball Bearing ABEC-5 (1/8"I.D. x 3/8"O.D. x 5/32"W) (option for #3545 & #3555l) 


#5937 Steel Ball Bearings ABEC-3 (1/8"I.D. x 3/8"O.D. x 5/32"W) (replacement for #3545 & #3555)