|
mini Titan V2 KIT
Specification
|
Full Length of Fuselage(mm / in.) |
640mm(25.19") |
|
Full Width of Fuselage(mm / in.) |
230mm(8.79") |
|
Total Height(mm / in.) |
209mm(8.2") |
|
Main Rotor Dia(mm / in.) |
745mm(28.46") |
|
Tail Rotor Dia(mm / in.) |
156mm(6.14") |
|
Gear Ratio |
1:11.5:4.4 |
|
Full Equipped Weight(g/ lbs.) |
approx.800g(28.35oz) |
Content
|
Item No. |
Mechanism KIT |
Motor |
Speed Controller |
Main Blade |
|
4712-K10 |
V |
- |
- |
Carbon Blade |
|
4712-K11 |
V |
3700KV |
BLC-40 |
|
Introduction
Heli On Steroids Performance has gone ballistic with the latest Mini Titan E325 V2. Tons of very impressive features have been injected to create the ultimate 3D machine in its category: lightweight Carbon / Aluminum main frame, full metal rotor head, lightweight 3D paddles, carbon fin, reinforced main shaft and a totally-redesigned fiberglass canopy. And there is more !
The V2 also comes equipped with radically longer rotor grips & rigid hub for generating additional lift and awesome responsiveness, even when flown under standard-size blades. To top it off, roll rate is exponentially faster than any other 450-size helis thanks to a lower blade-to-ground height, a high-positioned battery tray & motor mount design keeping CG much closer to the main rotor disc. “Pendulum” effect is reduced to a minimum making the V2 is much more stable platform. The longer grips & hub generates more left and brings extremely crisp & accurate pitch response.
With the Mini Titan E325 V2 machine, 3D pilots can finally get their hands on a totally aggressive performer : best power-to-weight & the widest adjustable mixing ratio among any 450-class helis. Get ready for a shock !
Features
1. 2-piece Reinforced Carbon Main Frame (1.5mm) 2. Super Rigid Carbon Frame & CNC Machined Aluminum Construction 3. Slim & Aerodynamic Pre-Painted Fiberglass Canopy 4. One-piece Machined Aluminum Mast Block/Servo Mount 5. Adjustable Bell-Hiller Mixing Ratio 6. Equipped With Lightweight Paddles for 3D (4.4gr) 7. Integrated One-piece High-positioned Battery & ESC Tray, 8. Metal & Carbon Light Tail Case/ Metal Grips 9. One-piece Low Gravity Molded Skid With Integrated Antenna Holder 10. Canopy with Integrated Heat Sink For Efficient Thermal Dissipation 11. Exclusive Receiver Tray 12. Come with a High Performance 3700KV Brushless Motor & 40A ESC as Standard Equipements (4712-K11)
별매품: ATK1267 Helicopter E-Pack (Electronic combo for mini copter). 조종기
|
※ RC비행기/헬리콥터/쿼드콥터 등의 비행체를 사용할 때 알아둬야할 점!!!
1. 입문자가 처음 구입할 경우엔 가급적 매장에 직접 방문하는 것을 추천합니다.
기체 조작 방법을 알려주고 비행시 주의 사항까지 교육 받을 수 있습니다.
2. 모든 RC 제품의 권장사용시간은 보통 7~10분을 권장합니다.
무리하게 사용시 모터나 부품에 무리가 갈 수 있으며, 리튬계열의 배터리는 과다 사용시 방전되어 재충전이 안됩니다.
3. RC비행체는 날리는 것보다 착륙하는게 더 어렵습니다.
조종 미숙으로 착륙시 제품의 파손률이 높으므로, 착륙지점으로 최대한 밀착한 후 조심스럽게 착륙을 해야 합니다.
※ RC비행기/헬리콥터/쿼드콥터 등의 비행체를 사용할 때 주의할 점!!!
1. 지상 150미터 이상으로 비행하는 것은 항공법으로 규제됩니다.
2. 관제공역/통제공역/주의공역에서 비행하려는 경우엔 서울이나 지방항공청에 문의해야 합니다.
3. 쿼드콥터 등으로 항공촬영을 하려면 국방부의 허가를 받아야 합니다.
주요 시설이 많은 서울 일부 지역에서는 기무사와 청와대 허가도 필요합니다.
(* 국방부 허가는 일주일정도 시간이 걸리기 때문에 미리 신청하는 것이 좋습니다.)
4. 취미로 RC비행체을 날리더라도 항공법 시행 규칙 제68조에서 규정하고 있는 조종사 준수사항은 지켜야 합니다.
- 조종사 준수사항에서 금지하고 있는 내용은 다음과 같습니다.
* 낙하물 투하
* 인명, 재산에 위험을 초래할 우려가 있는 방법으로 비행
* 목표물을 육안으로 확인할 수 없는 상태에서 비행
* 야간 비행
※ 시화,과천을 포함한 전국에 총 18개소에 설치된 ‘초경량비행장치 전용공역'에서는 자유롭게 비행할 수 있습니다.
|